
Engine builds and rebuilds in Cannonvale
Engine builds and rebuilds for cars, utes and 4WDs, quoted before work starts and tuned on our in-house Mainline dyno.
Quick answer
Elite Fleet Auto builds and rebuilds engines for cars, utes and 4WDs at 8 Galbraith Park Drive, Cannonvale, and can tune the result on our in-house Mainline 2WD dyno. Every engine is quoted before work starts. Call 07 4948 3204 for a quote.
Engine work explained
Repair, rebuild or build: what is the difference?
People use "engine work" to mean very different jobs, and the difference matters for the quote.
- An engine repair fixes a specific fault with the engine left largely as it is: a leak, a failed sensor, a head gasket, a timing component. That is the work on our mechanical repairs page.
- A rebuild takes a worn or damaged engine apart, works out what has failed and why, replaces or reconditions what is needed, and puts it back together to run like it should.
- A performance build goes further: the engine is built for a power and drivability goal, and then tuned so the fuel, timing and other settings match the new hardware.
Which one you need depends on what the engine is doing now and what you want from it. Tell us the vehicle, the engine and the goal when you call, and we will tell you whether it is a job we take and how we would approach it.
The process
How an engine job runs here
- Talk it through. Call with the make, model, engine and what you want: reliability, more performance, or getting a damaged engine running again.
- Inspect first. We look at the vehicle and, where it is needed, strip the engine far enough to see what has actually failed. No guessing at parts.
- Quote before work starts. You get a quote that sets out what is included before any build work begins. If something changes once the engine is apart, we call you before going further.
- Build. The engine is assembled and fitted in the same Cannonvale workshop as our mechanics and auto electricians, so wiring, sensors and the rest of the vehicle are checked as part of the job.
- Tune and check. Where the vehicle can go on our 2WD dyno, the engine is tuned under controlled load and checked before it goes home. AWD and constant-4WD vehicles: call first.
Lead time depends on the engine, parts and any machine work. We will give you a time with the quote.
Why the tune matters after a build
An engine that has been rebuilt or changed is not the engine the factory calibration was written for. New parts can change how much air the engine moves, how it responds and what fuelling it needs. Tuning it on a dyno means those settings are adjusted and checked under repeatable load, with the engine data in front of the tuner, rather than guessed on the road.
Our Mainline dyno is in the same building as the build, so there is no trailer trip to another shop. As workshop proof, an LS1-powered BMW E30 race car made 403.4 hp / 716.1 Nm on our Mainline dyno. That is a race car result, not a promise for a street build: every engine and vehicle is different. See dyno tuning and performance upgrades.
LS work
LS engines
For LS V8 owners there is also our LS head and cam package for 6.0, 6.2 and 5.7L LS engines, quoted per engine. A full LS swap into a vehicle that did not come with one is a different job again from rebuilding an engine already in the car. Our LS swap guide for Queensland covers what to plan for.
Queensland modification rules
Changing an engine, or changing it significantly, can need certification in Queensland, depending on the vehicle and the change. Check TMR's vehicle modifications page before work starts, or ask us when you call. Tell your insurer about any modification too.
General information only, not legal or engineering advice. Queensland rules change, so check TMR for the current requirements.
Why drivers choose us
North Queensland's number one performance mechanical and auto electrical shop
Engine work is where that line gets tested. Here is what stands behind it.
- 480+ Google reviews, rated 4.3 on Google Maps (as at 12 November 2026)
- An in-house Mainline 2WD chassis dyno at the Cannonvale workshop, so performance work is measured rather than guessed
- Real builds: an LS1-powered BMW E30 race car made 403.4 hp / 716.1 Nm on our Mainline dyno
- Mechanical and auto electrical in one workshop, with roadworthy inspections on site

Frequently asked questions
Do you build or rebuild engines in Cannonvale?
Yes. We build and rebuild engines for cars, utes and 4WDs at 8 Galbraith Park Drive, Cannonvale. Call 07 4948 3204 for a quote.
What engines do you work on?
Tell us the vehicle and engine when you call, and we will tell you if it is a job we take.
Do you dyno-tune a freshly built engine?
Yes, on our in-house Mainline 2WD dyno where the vehicle can be run on it. AWD and constant-4WD vehicles: call first.
How long does an engine build take?
Lead time depends on the engine, parts and machine work. We will give you a time with the quote.
How much does an engine rebuild cost?
Engine builds and rebuilds are quoted per engine, before work starts. Call 07 4948 3204.
Will an engine change need certification in Queensland?
It can, depending on the vehicle and the change. Check TMR's vehicle modifications page, or ask us before work starts, and tell your insurer about the modification.
Book
Book engine builds
Call 07 4948 3204 or send the form below with your make, model, year and rego and what you need. We are at 8 Galbraith Park Drive, Cannonvale QLD 4802, open Mon–Thu 8:00–16:30 and Fri 8:00–14:30.
Book a service or get a quote
Send us a message
Tell us your make, model and rego and what you need. We reply during workshop hours.
Quickest: call 07 4948 3204
Mon–Thu 8:00–16:30 · Fri 8:00–14:30
8 Galbraith Park Drive, Cannonvale QLD 4802
