8 Galbraith Park Drive, Cannonvale QLD 4802 · Mon–Thu 8:00–16:30 · Fri 8:00–14:3007 4948 3204
ECU unlock · In-house dyno

Locked or bricked ECU unlock and tune

A factory ECU locked by a previous tuner, or bricked by a failed flash, unlocked or recovered and then tuned on our in-house Mainline dyno. From $1,700 inc GST.

Quick answer

If your standard (factory) ECU has been locked by a previous tuner, or is broken or bricked, Elite Fleet Auto unlocks or recovers it, then tunes it on our in-house Mainline 2WD dyno at 8 Galbraith Park Drive, Cannonvale, from $1,700 inc GST. The final price depends on the vehicle and setup and is confirmed before work starts. Call 07 4948 3204 with the make, model, engine and what happened.

Locked ECUs

What a locked ECU is

Your engine control unit (ECU) holds the calibration that runs the engine: fuelling, ignition, boost and limits. Some tuners lock the ECU after they flash it, so nobody else can read or change the file. While the car stays with that tuner, it may never matter.

It becomes a problem when things change: you buy a car that was tuned by someone else, you move to the Whitsundays, you fit new parts that need the tune adjusted, or you simply want to use a different workshop. A locked ECU can stop another tuner adjusting the car, or even returning it closer to standard.

What a bricked ECU is

A bricked ECU is one that no longer works after a flash went wrong. Common causes are a write that was interrupted, battery voltage dropping during the flash, or the wrong file being loaded. The car may not start, or may not talk to a scan tool at all.

If that has happened, stop. Do not keep retrying the flash: each attempt can make recovery harder. Leave the ECU as it is and call us. If the car cannot be driven, call first. If the ECU has already been taken out of the car, bring it in with the vehicle details.

How the job runs here

  1. Call first. Tell us the make, model, year and engine, who tuned it and what happened.
  2. We check the ECU. Not every ECU can be unlocked or recovered. We check yours and tell you before going any further.
  3. Unlock or recover, and keep a copy. We read and keep a copy of what is on the ECU before we write anything.
  4. Baseline on the dyno. The car runs on our Mainline dyno so we can see where it is starting from.
  5. Tune and verify under load. The tune is built and checked on the dyno before the car goes home.

Price · inc GST

Price

ServicePrice (inc GST)
Locked or bricked ECU unlock and tuneFrom $1,700

Final price depends on vehicle and setup; we confirm before we start. 2WD Mainline dyno.

This is a separate service from a European ECU dyno tune, which is also from $1,700 inc GST. If your car is European and locked, we tell you which applies when we quote. Every dyno price is on the dyno tuning page.

What to bring

  • Make, model, year and engine
  • Who tuned it before, and roughly when
  • Any tune file, password or paperwork from the previous tuner
  • A list of modifications
  • A healthy battery, or tell us if it has been flat or weak: low voltage is a common cause of failed flashes

Our Mainline dyno is 2WD only. AWD and constant-4WD vehicles need a call to check before booking. Modifications may need certification in Queensland: see TMR's vehicle modifications page.

Why drivers choose us

North Queensland's number one performance mechanical and auto electrical shop

Unlocking a locked ECU takes the right tools and a dyno to check the result. We have both in the same workshop.

  • 480+ Google reviews, rated 4.3 on Google Maps (as at 12 November 2026)
  • An in-house Mainline 2WD chassis dyno at the Cannonvale workshop, so performance work is measured rather than guessed
  • Real builds: an LS1-powered BMW E30 race car made 403.4 hp / 716.1 Nm on our Mainline dyno
  • Mechanical and auto electrical in one workshop, with roadworthy inspections on site

See the dyno · Builds on Instagram

Mainline dyno screen at Elite Fleet Auto showing 403.4 hp and 716.1 Nm from an LS1-powered BMW E30

Frequently asked questions

Can you unlock an ECU that another tuner locked?

For a standard (factory) ECU, yes, where that ECU can be unlocked. Not every one can, so we check first and tell you before going further.

What is a bricked ECU, and can you recover it?

A bricked ECU no longer works after a failed or interrupted flash, or a wrong file. Where we can recover it, we do that first and then tune it. Not every ECU can be recovered.

How much is a locked or bricked ECU unlock and tune?

From $1,700 inc GST. The final price depends on the vehicle and setup, and we confirm it before we start.

Is that the same as a European ECU tune?

No. It is a separate service with the same starting price. A European ECU dyno tune is also from $1,700 inc GST.

Can every locked ECU be unlocked?

Not always. We check the ECU and tell you before we go ahead.

Can you put my AWD car on the dyno?

Our Mainline dyno is 2WD only. Call before booking and we will check whether your vehicle can go on it.

Book

Book locked ECU unlock

Call 07 4948 3204 or send the form below with your make, model, year and rego and what you need. We are at 8 Galbraith Park Drive, Cannonvale QLD 4802, open Mon–Thu 8:00–16:30 and Fri 8:00–14:30.

Book a service or get a quote

Send us a message

Tell us your make, model and rego and what you need. We reply during workshop hours.

Quickest: call 07 4948 3204

Mon–Thu 8:00–16:30 · Fri 8:00–14:30
8 Galbraith Park Drive, Cannonvale QLD 4802

We reply during workshop hours. In a hurry? Call 07 4948 3204.

We use your details only to reply to your enquiry. See our privacy policy.

Call 07 4948 3204Book / Quote